Adding Device to MDM (ARGO)

Modified on Thu, 27 Feb at 9:42 AM


1. First, turn on the device by holding the power button for three seconds. A welcome screen will appear press the scroll wheel to start the OS setup.	2. On the next screen the DigiLens Visualize Program Terms will appear, scroll to the bottom by rolling the scroll wheel forward and accept by single pressing the scroll wheel.

3. Select the preferred language.	4. Select QR CODE.

5. As a standard user, scan the QR code that was provided by the IT administrator (Scanning the QR code might require getting very close to the code).

6. From here the provisioning process can be completed by following the steps from Microsoft Intune on the device. It is recommended to follow the Intune process using Focus Mode, or through a screen sharing application such as Vysor or SCRCPY. Whichever method is chosen, follow the prompts on the screen and finish the Microsoft Intune Steps.

7. Once the Microsoft Intune steps are completed the rest of the OS setup can be completed using the scroll wheel. Such as renaming the device, selecting a time zone, Wi-Fi networks or Bluetooth devices.

8. At the end of the setup, there will be a confirmation screen. Select CONFIRM if the information is correct.