OS Setup (ARGO)

1. First, turn on the device by holding the power button for three seconds. A welcome screen will appear press the scroll wheel to start the OS setup.	2. On the next screen the DigiLens Visualize Program Terms will appear, scroll to the bottom by rolling the scroll wheel forward and accept by single pressing the scroll wheel.
3. Select the preferred language.	4. Select a setup method, for this guide it will be DigiOS. For more information on setting up the device through MDM please visit page Adding Argo to MDM.
5. On the following screen you can change the device name and select continue when ready.	6. Select the preferred time zone.
6. Select the preferred Wi-Fi network and enter the appropriate password. Once completed and Wi-Fi is connected, select continue.	7. On the next screen the option will appear to connect any Bluetooth devices, for this guide select the skip option but if at a later point you would like to add a Bluetooth device please visit Connecting Bluetooth.

8. On the final screen, the ARGO will display all the previous information. If all is correct select CONFIRM, if something needs to be changed select RESTART.  

9. Once Confirm is selected the device will restart and present the home page. Congratulations the ARGO has been set up.